Technical Data Sheet

AMSTA Premium Series

Document No. TDS-1049

Revised: Oct 2026

1. Product Description

This is a placeholder page representing an official AMSTA Technical Data Sheet (TDS). In a real production environment, this page would host downloadable PDF specs or a dynamic rendering of product specifications including chemical composition, dry times, VOC levels, and safety handling instructions.

2. Technical Specifications

Finish	Matt / Satin / Gloss
Coverage	Approx. 12-14 m²/liter depending on surface porosity
Drying Time	Touch Dry: 30 minutes \| Recoat: 2-4 hours
Recommended Thinner	Clean Water (for Emulsion based)

3. Surface Preparation

Ensure all surfaces are clean, dry, and free from dirt, dust, grease, wax, flaking paint, rust, and biological growth. Treat existing fungal or algal growth with a proprietary fungicidal wash.

New concrete must mature for a minimum of 28 days before painting.
Fill all cracks and surface defects with appropriate filler.
Apply AMSTA Alkali Resisting Primer before the topcoat.

Disclaimer: The information provided on this sheet is given in good faith and is to the best of our knowledge accurate at the time of publication. Since methods of application and actual site conditions are beyond our control, no guarantee is implied.